Golf Club Blog - Everything You Need To Know Megablog
Friday, March 07, 2008
Reviews on Golf Putters
Our Featured Golf Writer
Get this best selling golf eBook and Mp3 audio file to improve your skill level
Some Geat Golf Tips
by Lee MacRae
Here are some great tips to help improve your game from tee-off to the final hole.
Everyone always learns the rule to play your drive off the inside of your front foot's heel. While this is good general advice, it is really just positioning the ball so that it is hit on the upswing, rather than downswing like an iron. The reason is that woods have a very low angle to the clubface (as opposed to irons), and need a "lift" at impact to create the optimal trajectory. I would have someone watch your swing while facing you and try to pinpoint where your swing bottoms out. Position the ball just after that point.
At the top of the backswing, there are several helpful checkpoints for achieving more distance: full upper body coil, solid base with your lower body, left knee turns past the golf ball and good, wide extension with the arms.
One option for better accuracy on tight holes is to choke down a few inches on the grip of the driver. The shorter, firmer swing will enhance accuracy without sacrificing too much distance [you'll still hit longer than you would with a fairway wood]. But the key here is to cut down on the wrist cock and make a three-quarter swing. In other words, you shouldn't really give yourself an opportunity to hit and off line drive
Remember that your golf eqiupment is not the whole story. Techinique plays a large part in how long and straight you drive the ball. Diligently practice using tips like these and your will see a great deal of improvement in your teee shots.
About the author
Lee MacRae runs several online stores where you can find a great golf swing aid or a great golf hybrid club today!
Golf Snippets
Golf Putters
The trajectory of a golf ball and the distance it travels depends on its initial trajectory, speed and spin, as well as what it's moving through (air). The air is not always the same. It varies in temperature, pressure, humidity and density. If there were no air whatsoever, the golf ball would not travel far. Likewise, if a ball is hit in air with no spin, it will not travel far.
To find out more just go to golf trainings aids
Golf Training Aids
How does a player cultivate the proper length of backswing? We are all individuals and our muscle coordination is not the same,therefore it would be foolish to try to force the club to a parallel position at the top of the backswing. Trying to take the clubhead to parallel will not only shorten your distance it will wreck your accuracy as well. So returning to the earlier premise:The club should not go back any further than you can turn your shoulders.
For more information go to golf trainings aids
Beginners Golf Training Aids
Learning how to aim is vital if your to have success in scoring. The clubface is the only thing that will make contact with the ball, therefore the clubface should be aimed towards the target with the shoulders paralleling the target line. Do not take the stance first. The feet do not hit the ball, so line up the clubface first, and then take your stance.
To learn more go to golf trainings aids
More Golf News
Tour Players Discuss the New Titleist PT 585.H Utility Metal
Thu, 31 Aug 2006 00:00:00 GMT
Tour players, including Lucas Glover, Arron Oberholser and Davis Love III talk about the new <a span style="font-family: Arial, Verdana, Helvetica; font-size: 11
px; font-weight:none; color:#A40101;"href="/golfclubs/utilities/585h.asp">Titleist PT 585.H</a>, that blends the distance and playability of fairway metals with the shot and trajectory control of an iron for greater versatility from the tee, fairway and rough. <a span style="font-family: Arial, Verdana, Helvetica; font-size: 11
px; font-weight:none; color:#A40101;"href="/contests/585.asp">Enter Sweepstakes</a> to win your own PT 585.H
golf travel case | golf cart
¶ 12:32 PM 0 comments
Our Featured Golf Writer
Get this best selling golf eBook and Mp3 audio file to improve your skill level
Some Geat Golf Tips
by Lee MacRae
Here are some great tips to help improve your game from tee-off to the final hole.
Everyone always learns the rule to play your drive off the inside of your front foot's heel. While this is good general advice, it is really just positioning the ball so that it is hit on the upswing, rather than downswing like an iron. The reason is that woods have a very low angle to the clubface (as opposed to irons), and need a "lift" at impact to create the optimal trajectory. I would have someone watch your swing while facing you and try to pinpoint where your swing bottoms out. Position the ball just after that point.
At the top of the backswing, there are several helpful checkpoints for achieving more distance: full upper body coil, solid base with your lower body, left knee turns past the golf ball and good, wide extension with the arms.
One option for better accuracy on tight holes is to choke down a few inches on the grip of the driver. The shorter, firmer swing will enhance accuracy without sacrificing too much distance [you'll still hit longer than you would with a fairway wood]. But the key here is to cut down on the wrist cock and make a three-quarter swing. In other words, you shouldn't really give yourself an opportunity to hit and off line drive
Remember that your golf eqiupment is not the whole story. Techinique plays a large part in how long and straight you drive the ball. Diligently practice using tips like these and your will see a great deal of improvement in your teee shots.
About the author
Lee MacRae runs several online stores where you can find a great golf swing aid or a great golf hybrid club today!
Golf Snippets
Golf Putters
The trajectory of a golf ball and the distance it travels depends on its initial trajectory, speed and spin, as well as what it's moving through (air). The air is not always the same. It varies in temperature, pressure, humidity and density. If there were no air whatsoever, the golf ball would not travel far. Likewise, if a ball is hit in air with no spin, it will not travel far.
To find out more just go to golf trainings aids
Golf Training Aids
How does a player cultivate the proper length of backswing? We are all individuals and our muscle coordination is not the same,therefore it would be foolish to try to force the club to a parallel position at the top of the backswing. Trying to take the clubhead to parallel will not only shorten your distance it will wreck your accuracy as well. So returning to the earlier premise:The club should not go back any further than you can turn your shoulders.
For more information go to golf trainings aids
Beginners Golf Training Aids
Learning how to aim is vital if your to have success in scoring. The clubface is the only thing that will make contact with the ball, therefore the clubface should be aimed towards the target with the shoulders paralleling the target line. Do not take the stance first. The feet do not hit the ball, so line up the clubface first, and then take your stance.
To learn more go to golf trainings aids
More Golf News
Tour Players Discuss the New Titleist PT 585.H Utility Metal
Thu, 31 Aug 2006 00:00:00 GMT
Tour players, including Lucas Glover, Arron Oberholser and Davis Love III talk about the new <a span style="font-family: Arial, Verdana, Helvetica; font-size: 11
px; font-weight:none; color:#A40101;"href="/golfclubs/utilities/585h.asp">Titleist PT 585.H</a>, that blends the distance and playability of fairway metals with the shot and trajectory control of an iron for greater versatility from the tee, fairway and rough. <a span style="font-family: Arial, Verdana, Helvetica; font-size: 11
px; font-weight:none; color:#A40101;"href="/contests/585.asp">Enter Sweepstakes</a> to win your own PT 585.H
golf travel case | golf cart
Labels: indoor putting greens | golf training aids
Up-to-date information on Hybrid Golf Clubs
Our Featured Golf Article
Instantly slash your golf score by creating perfect impact!
Wondering which golf clubs you should buy?
By: Lee MacRae
With such a large variety of golf clubs on the market today, it is no wonder that many newcomers to the game have a hard time when it comes to choosing new clubs.
We will go through a few basic tips to help you determine which golf clubs are right for you.
First of all, it should be noted that standard golf clubs will work for most everyone standing between 5 feet and six feet tall. That principle holds for both sexes. If you are taller or shorter than that, then you should seriously take a look at custom made clubs.
Will that be cast iron or forged?
Well, the best answer is usually "cast iron".
What makes cast iron the right choice for most? Well, cast iron golf clubs normally have a bigger "sweet spot". That term refers to the area in the middle of the face of the club head where the ball should be struck for maximum distance and accuracy. The larger the "sweet spot" on a club face, the more area you have to strike the ball well. It makes it a little easier to hit the "bulls eye" every time on your shots. Beginners especially benefit from that standard cast iron feature. Until their swing plane is more developed, they will have an easier time striking the ball on a consistant basis with the cast iron club. That is why clubs like "Big Bertha" came on the market. The large oversized head obviously gives a much larger sweet spot than a normal driver. Average golfers get longer and straighter drives on a more consistant basis.
Forged iron clubs are generally the opposite. Harder to hit with because of a smaller sweet spot on the club face.
Why, you ask, are forged iron clubs even made then?
Because the "softer" forged metal gives the golfer a better feel than the harder cast iron does. The more seasoned player, especially the pros on the circuit, don't need that larger sweet spot. They have a more consistant swing plane and strike the ball with far more accuracy. They use the "feel" of the the forged iron clubs to influence the flight of the ball in a way that a beginner or average player can't.
The shaft of the club is your next thing to look at. Specifically the material it will be made from. Basically, you have steel or composite shafts
The significant factor here is club speed. A typical golfer will have a club head velocity between 80-94 mph. A slower swing speed usually signifies you had better think of using a shaft made from composite material . With a slower swing speed comes less distance on your drives. Less distance means more shots needed to reach the putting green. Not a good thing if you want to lower your score. And that is where the composite golf club shaft enters the picture. It gives you a lot more distance than you would get with your normal swing and a steel shaft.
By contrast, those with good distances on their shots, will fare much better by using a steel shaft that will give them some touch and control on their shots.
Visit your local golf pro shop or look for a store that offers custom work and they will help you to determine your own club head speed and which type of shaft you should use. Or you can buy one of the many swing speed radar devices on the market and clock your speed yourself.
With merely these few starting points, it is usually best if you rent a few different sets of clubs as you play and take note of how each club aids or hinders your game. You are seeking to see your individual strong points or weaknesses. Try the various types and kinds of golf clubs available to you and, in time, you will be able to determine which clubs offer the best advantages for your game.
Work on these tips and make sure you tee off with a positive mindset. The more you practice and implement what you learn, the more confidence you will gain in your ability to hit it straight and long. And watch your scores begin to plummet!
Develop a great golf swing with an amazing golf training aid!
Golf Snippets
Golf
To achieve the goal of hitting the ball at the bottom of the swing arc. Your drives should be hit slightly on the upswing, iron shots are struck slightly on the downswing. Fairway woods are hit at the bottom of the swing arc.
For more information go to golf trainings aids
Golf Putting Aids
To start with a proven ball position. Moving a golf ball even two inches forward or back in your stance can make a great deal of difference in shot consistency. Start with the ball a couple of inches inside the left heel. After you master this consistent ball position, you can experiment with other ball positions. However, a ball too far to the front of your stance will increase the chances of a slice by encouraging an outside-to-inside swing. A ball too far back in the stance will make it difficult to get the clubface closed by impact and may cause a push or a push slice
To find out more just go to golf
Womens Golf Clubs
To develop the best possible grip for you. Every golfer swings and grips the club differently. Over 90 percent of golfers use the Vardon or overlapping grip. Players with smaller hands sometimes find the interlocking grip, with the little finger of the right hand interlocked with the index finger of the left hand, works best for them. Players with smaller should use a baseball type grip.
To learn more go to golf
Golf
This is a very common problem for golfers � and it's an awkward adjustment. The solution is very simple, however. Instead of setting your driver behind the ball such that the center of the face is aligned with the ball, move backwards a couple of inches (towards your back) such that the toe of your driver is aligned with the ball. Now do the test again. Stretch out your arms and pick the club up to the ball's height. Is the ball aligned with the center of the driver face? If so, put the club back down and fire! If not, keep moving back until it is.
To learn more go to golf equipment
Today's Golf News
Titleist Golf Ball Operations To Be Featured on National Geographic Channel
Thu, 06 Mar 2008 00:00:00 GMT
golf equipment
¶ 12:23 PM 0 comments
Our Featured Golf Article
Instantly slash your golf score by creating perfect impact!
Wondering which golf clubs you should buy?
By: Lee MacRae
With such a large variety of golf clubs on the market today, it is no wonder that many newcomers to the game have a hard time when it comes to choosing new clubs.
We will go through a few basic tips to help you determine which golf clubs are right for you.
First of all, it should be noted that standard golf clubs will work for most everyone standing between 5 feet and six feet tall. That principle holds for both sexes. If you are taller or shorter than that, then you should seriously take a look at custom made clubs.
Will that be cast iron or forged?
Well, the best answer is usually "cast iron".
What makes cast iron the right choice for most? Well, cast iron golf clubs normally have a bigger "sweet spot". That term refers to the area in the middle of the face of the club head where the ball should be struck for maximum distance and accuracy. The larger the "sweet spot" on a club face, the more area you have to strike the ball well. It makes it a little easier to hit the "bulls eye" every time on your shots. Beginners especially benefit from that standard cast iron feature. Until their swing plane is more developed, they will have an easier time striking the ball on a consistant basis with the cast iron club. That is why clubs like "Big Bertha" came on the market. The large oversized head obviously gives a much larger sweet spot than a normal driver. Average golfers get longer and straighter drives on a more consistant basis.
Forged iron clubs are generally the opposite. Harder to hit with because of a smaller sweet spot on the club face.
Why, you ask, are forged iron clubs even made then?
Because the "softer" forged metal gives the golfer a better feel than the harder cast iron does. The more seasoned player, especially the pros on the circuit, don't need that larger sweet spot. They have a more consistant swing plane and strike the ball with far more accuracy. They use the "feel" of the the forged iron clubs to influence the flight of the ball in a way that a beginner or average player can't.
The shaft of the club is your next thing to look at. Specifically the material it will be made from. Basically, you have steel or composite shafts
The significant factor here is club speed. A typical golfer will have a club head velocity between 80-94 mph. A slower swing speed usually signifies you had better think of using a shaft made from composite material . With a slower swing speed comes less distance on your drives. Less distance means more shots needed to reach the putting green. Not a good thing if you want to lower your score. And that is where the composite golf club shaft enters the picture. It gives you a lot more distance than you would get with your normal swing and a steel shaft.
By contrast, those with good distances on their shots, will fare much better by using a steel shaft that will give them some touch and control on their shots.
Visit your local golf pro shop or look for a store that offers custom work and they will help you to determine your own club head speed and which type of shaft you should use. Or you can buy one of the many swing speed radar devices on the market and clock your speed yourself.
With merely these few starting points, it is usually best if you rent a few different sets of clubs as you play and take note of how each club aids or hinders your game. You are seeking to see your individual strong points or weaknesses. Try the various types and kinds of golf clubs available to you and, in time, you will be able to determine which clubs offer the best advantages for your game.
Work on these tips and make sure you tee off with a positive mindset. The more you practice and implement what you learn, the more confidence you will gain in your ability to hit it straight and long. And watch your scores begin to plummet!
Develop a great golf swing with an amazing golf training aid!
Golf Snippets
Golf
To achieve the goal of hitting the ball at the bottom of the swing arc. Your drives should be hit slightly on the upswing, iron shots are struck slightly on the downswing. Fairway woods are hit at the bottom of the swing arc.
For more information go to golf trainings aids
Golf Putting Aids
To start with a proven ball position. Moving a golf ball even two inches forward or back in your stance can make a great deal of difference in shot consistency. Start with the ball a couple of inches inside the left heel. After you master this consistent ball position, you can experiment with other ball positions. However, a ball too far to the front of your stance will increase the chances of a slice by encouraging an outside-to-inside swing. A ball too far back in the stance will make it difficult to get the clubface closed by impact and may cause a push or a push slice
To find out more just go to golf
Womens Golf Clubs
To develop the best possible grip for you. Every golfer swings and grips the club differently. Over 90 percent of golfers use the Vardon or overlapping grip. Players with smaller hands sometimes find the interlocking grip, with the little finger of the right hand interlocked with the index finger of the left hand, works best for them. Players with smaller should use a baseball type grip.
To learn more go to golf
Golf
This is a very common problem for golfers � and it's an awkward adjustment. The solution is very simple, however. Instead of setting your driver behind the ball such that the center of the face is aligned with the ball, move backwards a couple of inches (towards your back) such that the toe of your driver is aligned with the ball. Now do the test again. Stretch out your arms and pick the club up to the ball's height. Is the ball aligned with the center of the driver face? If so, put the club back down and fire! If not, keep moving back until it is.
To learn more go to golf equipment
Today's Golf News
Titleist Golf Ball Operations To Be Featured on National Geographic Channel
Thu, 06 Mar 2008 00:00:00 GMT
golf equipment
Labels: golf putting aids
Learn about Beginners Golf training Aid
Featured Golf Article
Get this best selling golf eBook and Mp3 audio file to improve your skill level
Cast Iron Golf Clubs Or Forged?
By: Lee MacRae
With such a large variety of golf clubs on the market today, it is no wonder that many newcomers to the game have a hard time when it comes to choosing new clubs.
We will go through a few basic tips to help you determine which golf clubs are right for you.
First, take note of your height. Standard golf clubs are designed for individuals bewteen five and six feet. That goes every bit for both men and women. If you are taller or shorter than that, then you should seriously take a look at custom made clubs.
Cast Iron or Forged Iron?
For virtually all golfers, the stock cast iron golf clubs will be the soundest way to go.
The major reason? Because most standard cast iron golf clubs have a larger "sweet spot". That term refers to the area in the middle of the face of the club head where the ball should be struck for maximum distance and accuracy. A larger sweet spot gives you a larger striking area and greater odds for a well-hit shot. Being a little off center will not affect your shot to any great degree. Beginners especially benefit from that standard cast iron feature. Without a steady consistant swing, a larger striking area will produce better shots overall. This is the major reason why you see larger or even "oversized" clubs made, especially the oversized drivers today. These clubs allow for a larger sweet spot and make the game a lot easier for the average player
Forged iron clubs are generally the opposite. Harder to hit with because of a smaller sweet spot on the club face.
Why, you ask, are forged iron clubs even made then?
This is due to the fact that forged iron offers a better "feel" on your shot because it is a softer metal than cast iron. The better players, on the other hand, will give up that larger sweet spot [and even some distance] to get that better feel of each and every shot they take. With a more consistant swing, they usually strike the ball dead center on most shots anyway. With the better feel of the forged iron club, they can draw, fade, hook or slice the ball deliberately when circumstances on the golf course require it.
The next consideration is the material for the shaft. Steel or composite?
The important touchstone here is golf club speed. An ordinary golf player will have a club velocity of 80-94 mph. Slower speeds normally means looking at a shaft made from composite material. The problem with lower speed is you get less distance on your shots. You need to generate more speed [and more power] or find some way to compensate until you can. And that is where the composite golf club shaft enters the picture. It gives you a lot more distance than you would get with your normal swing and a steel shaft.
On the other hand, if you already have good distance on your shots due to good swing speed, you can add some touch and feel to your game very similar to that obtained by using the forged iron clubs. You get the best of both worlds.
Determining your own swing speed is not difficult. If you don't have a local pro shop with the right equipment, you can find small microwave Doppler radar devices that are run by AAA batterieson the market. You simply set it near your tee and swing away.
With only these few starting tips, it is typically best if you rent a few different sets of clubs as you play and take note of how each club serves or handicaps your game. You are looking to ascertain your own strengths as well as weaknesses. Check out the assorted types and varieties of golf clubs you may find in a rental shop, for example, and discover what works best for you.
These simple golf driving tips have proved effective in helping many golfers around the world improve their drives off the tee. Simply apply what you have read here to your own circumstances. Here's to your own improvement!
Improve your golf game with a great golf training aid today!
Let's Talk About Forex
Golf Equipment
Every golfer knows that if you are playing a shot into the wind, you must hit more club. If you're playing a shot with the wind, you must hit less club. Even professionals have a difficult time playing in the wind. The average score in a tournament is always higher when it is windy.
To learn more go to golf trainings aids
Indoor Putting Greens
The left shoulder sets up the backswing by rotating down and under the chin. This shoulder movement directs the clubhead travel to the inside of the target line. The shoulder turn determines the length of the backswing.
To learn more go to golf equipment
Golf Accessories
To have a good angle the left leg passes the ball first, hands second, and clubhead last. This motion automatically moves the clubhead in the descending angle of approach. Having the clubhead passing the hands prior to impact creates an ascending angle of approach. Most of the time with this action the clubhead will hit the ground behind the ball (Chili dipping) or the swing bottoms out early and the ball is struck on the upswing, topping it.
To learn more go to golf trainings aids
More Forex News
Titleist Sets Standard As The Overwhelming Tee-To-Green Equipment Choice at 2006 U.S. Junior Amateur Championship
Mon, 24 Jul 2006 00:00:00 GMT
Tops Golf Ball Count with 138 of 156 Players in Field
¶ 9:28 AM 0 comments
Featured Golf Article
Get this best selling golf eBook and Mp3 audio file to improve your skill level
Cast Iron Golf Clubs Or Forged?
By: Lee MacRae
With such a large variety of golf clubs on the market today, it is no wonder that many newcomers to the game have a hard time when it comes to choosing new clubs.
We will go through a few basic tips to help you determine which golf clubs are right for you.
First, take note of your height. Standard golf clubs are designed for individuals bewteen five and six feet. That goes every bit for both men and women. If you are taller or shorter than that, then you should seriously take a look at custom made clubs.
Cast Iron or Forged Iron?
For virtually all golfers, the stock cast iron golf clubs will be the soundest way to go.
The major reason? Because most standard cast iron golf clubs have a larger "sweet spot". That term refers to the area in the middle of the face of the club head where the ball should be struck for maximum distance and accuracy. A larger sweet spot gives you a larger striking area and greater odds for a well-hit shot. Being a little off center will not affect your shot to any great degree. Beginners especially benefit from that standard cast iron feature. Without a steady consistant swing, a larger striking area will produce better shots overall. This is the major reason why you see larger or even "oversized" clubs made, especially the oversized drivers today. These clubs allow for a larger sweet spot and make the game a lot easier for the average player
Forged iron clubs are generally the opposite. Harder to hit with because of a smaller sweet spot on the club face.
Why, you ask, are forged iron clubs even made then?
This is due to the fact that forged iron offers a better "feel" on your shot because it is a softer metal than cast iron. The better players, on the other hand, will give up that larger sweet spot [and even some distance] to get that better feel of each and every shot they take. With a more consistant swing, they usually strike the ball dead center on most shots anyway. With the better feel of the forged iron club, they can draw, fade, hook or slice the ball deliberately when circumstances on the golf course require it.
The next consideration is the material for the shaft. Steel or composite?
The important touchstone here is golf club speed. An ordinary golf player will have a club velocity of 80-94 mph. Slower speeds normally means looking at a shaft made from composite material. The problem with lower speed is you get less distance on your shots. You need to generate more speed [and more power] or find some way to compensate until you can. And that is where the composite golf club shaft enters the picture. It gives you a lot more distance than you would get with your normal swing and a steel shaft.
On the other hand, if you already have good distance on your shots due to good swing speed, you can add some touch and feel to your game very similar to that obtained by using the forged iron clubs. You get the best of both worlds.
Determining your own swing speed is not difficult. If you don't have a local pro shop with the right equipment, you can find small microwave Doppler radar devices that are run by AAA batterieson the market. You simply set it near your tee and swing away.
With only these few starting tips, it is typically best if you rent a few different sets of clubs as you play and take note of how each club serves or handicaps your game. You are looking to ascertain your own strengths as well as weaknesses. Check out the assorted types and varieties of golf clubs you may find in a rental shop, for example, and discover what works best for you.
These simple golf driving tips have proved effective in helping many golfers around the world improve their drives off the tee. Simply apply what you have read here to your own circumstances. Here's to your own improvement!
Improve your golf game with a great golf training aid today!
Let's Talk About Forex
Golf Equipment
Every golfer knows that if you are playing a shot into the wind, you must hit more club. If you're playing a shot with the wind, you must hit less club. Even professionals have a difficult time playing in the wind. The average score in a tournament is always higher when it is windy.
To learn more go to golf trainings aids
Indoor Putting Greens
The left shoulder sets up the backswing by rotating down and under the chin. This shoulder movement directs the clubhead travel to the inside of the target line. The shoulder turn determines the length of the backswing.
To learn more go to golf equipment
Golf Accessories
To have a good angle the left leg passes the ball first, hands second, and clubhead last. This motion automatically moves the clubhead in the descending angle of approach. Having the clubhead passing the hands prior to impact creates an ascending angle of approach. Most of the time with this action the clubhead will hit the ground behind the ball (Chili dipping) or the swing bottoms out early and the ball is struck on the upswing, topping it.
To learn more go to golf trainings aids
More Forex News
Titleist Sets Standard As The Overwhelming Tee-To-Green Equipment Choice at 2006 U.S. Junior Amateur Championship
Mon, 24 Jul 2006 00:00:00 GMT
Tops Golf Ball Count with 138 of 156 Players in Field
Labels: golf putting aids | beginners golf training aids
